12
Turning the System All On
Use this function to turn on the entire system. Once you’ve pressed
the 9 key, exit delay time starts to count down. You should leave before
exit delay time expires. Leaving after exit delay expires causes an
alarm event.
1. Make sure that all points are normal (not faulted). Press the
9
key. The display shows:
2. If all points are normal, exit delay time begins. You should leave
now. If your system has a faulted point, its point light winks. You
should return the point to normal, or refer to
Bypassing Points,
page
15.
3. During exit delay, you may stop the system from turning on by
pressing
CLEAR
.
4. When exit delay time expires, the keypad beeps three times and
then the system turns on.
5. To turn the system off, enter your personal passcode.
71-07374-000-B Users Guide.p65
08/21/2001, 1:05 PM
12
Summary of Contents for Security System
Page 1: ...Security System User s Guide 71 07374 000 B Users Guide p65 08 21 2001 1 05 PM 1 ...
Page 34: ...34 71 07374 000 B Users Guide p65 08 21 2001 1 06 PM 34 ...
Page 35: ...35 71 07374 000 B Users Guide p65 08 21 2001 1 06 PM 35 ...
Page 36: ...71 07374 000 B 8 01 2001 Radionics 71 07374 000 B Users Guide p65 08 21 2001 1 06 PM 36 ...
