![Radionics D9024 Manual Download Page 6](http://html1.mh-extra.com/html/radionics/d9024/d9024_manual_3322613006.webp)
1997 Radionics All rights reserved
The Radionics logo is a registered trademark of Radionics,
1800 Abbott Street, Salinas, CA 93901, USA
34377B 04/97
D9024/D10024
Networking Guide
Page 6 of 18
1
2
3
4
5
6
7
8
System
Reset
Trouble
Silence
9
10
11
12
13
14
15
16
17
18
19
20
Letters
Numbers
Alarm
Silence
Manual
Alarm
ENTER
YES
Keyword
NO
Alphanumeric Display
Alphanumeric
Control Keys
D10024
ALARM
TROUBLE
LED Display
Zone LEDs
Keys
Figure 3: Control Keys
Repeaters and peripherals:
•
Repeater panels will mimic the text information on the LCD of the panel to which they are
connected.
B.2. Shared Zone Network Programming
Follow the instructions in the D9024/D10024 Programmer’s Guide, Radionics part number 74-07662-
000, to set up and configure individual panels. To simplify the network programming procedure, the
panels may be set up so that all programming is done from the master panel. To do this, run the
setup sequence,
Section C.1.
of the D9024/D10024 Programmer’s Guide, on each panel and set the
Memory Lock Check,
Section C.1.h.
, to [No]. Leave the memory lock switch in the unlocked
position. After completing the Master Panel Network Programming use the procedure outlined at the
beginning of
Section B.2.b.
of this guide to program the slave panels.
B.2.a. Master Panel Programming, Shared Zone Network
Press the “>“ key to display the Operator’s Menu, Main Level.
D10024
SHIFT
G
T
6
[Active] 1)Commission 2)Test 3)Time [1]
4)Enable 5)Disable 6)PRINT 7)View
O
A
N
0
B
C
P
1
2
D
Q
E
R
3
4
F
S
5
H
U
7
V
I
J
W
8
9
K
X
L
Y
M
Z
CHANGE
Figure 4: Main Menu
Select option one 1) Commission, by pressing the “1” key.
The display prompts, “Please key in your password”
[Active] 1)Commission 2)Test 3)Time [1]
4) Enable 5)Disable 6)Print 7)View
1)CONFIGURE YES)More Options [A]
2)INSPECT 3)NORMAL OPERATION
1)Time/Date 2)Program Integrity [A]
3)Power Supplies 4)Modify level 2 code
1)Day Modes 2)Setup options 3)Network [A]
Press the "1" Key
Press the "YES" Key
Press the "YES" Key
Enter Pass Code
Figure 5: Path Through Commission Menus to Network