Radionics D2112, User Manual

Page: 32 / 35

31
Security System Glossary
All On - To turn on all of the points in the system.
Burglary Alarm Tone - A constant warble tone.
Bypass - To selectively remove points from the security system
temporarily.
Central Station - A facility where trained personnel monitor your
security system 24 hours a day. Your security system may be
programmed to contact the central station during alarm condi-
tions, enabling central station personnel to dispatch the proper
authorities.
Entry Delay - A programmed delay of the system alarm response
which allows you to enter the building (through the entry door)
to turn your system off. If you don’t turn the system off before
the delay time expires, the system begins an alarm response which
may include reports to the central station.
Error Tone - The same warble tone as the Trouble Tone, but it is
not repeated.
Exit Delay - A programmed delay of system alarm response which
allows you to exit after turning the system on. If you don’t exit
before the delay time expires, entry delay begins. You must turn
the system off. If you don’t turn the system off before the delay
time expires, the system begins an alarm response which may
include reports to the central station.
Faulted Point - A point that is not normal (a door or window is
open).
Fire Alarm Tone - A warble tone that is on for one second, then
briefly off (repeatedly).
Flashing Light - A rapidly blinking light.
No Delay - Turning the system on without entry or exit delay.
Part On - To turn on part of the points in the system.
Point - A detection device, or group of devices connected to your
security system. Points display individually at the keypad on lights
1 to 8.