15
GB
2. When your radio is connected to power, the unit will be in Standby mode.
3. Always unclip and extend the aerial when listening to
DAB or FM radio. The aerial has a swivel base so can be
set to different angles for best reception.
Ensure all connections are
connected before connecting to
the mains power socket.
Remove the mains plug from the
mains socket if you want to switch
the unit off completely.
To the mains
socket
Extend the aerial before switching to DAB mode
for the first time. This will ensure that the initial scan
captures all stations in your area.
Turning the Radio On for the First Time
1. Unwind the mains cable to its full length. Connect the mains plug to a mains socket.
Make sure the mains plug is fully inserted into the mains socket.
4. Press on the unit or on the remote control to switch
the unit between the ON and STANDBY modes.
5. The unit will automatically enter into DAB mode and
perform the auto scan function. During the scan the
display will show “Scanning …” together with a slide
bar that indicates the progress of the scan and the
amount of stations that have been found so far.
Once the scan has finished, the unit will broadcast the
first alphanumerically found station. To explore the
found stations,
turn SCROLL & SELECT dial on the unit
or press
on the remote control
. When you find a
station that you would like to listen to, press
SCROLL &
SELECT on the unit or OK on the remote control
.
6. Turn SCROLL & SELECT dial on the unit or press on
the remote control to select YES to start setup or NO to
skip setup. Press SCROLL & SELECT on the unit or OK
on the remote control to confirm.
12:00
Scanning...
19
DAB
RNDB_W13E_IB_5L_RC_130513.indb 15
13/5/13 12:19 PM
