4GT LTE Cat-M1 Installation Manual
2019
Page | 10
3 WIRING SCHEMATICS
3.1 Wiring the 4GT to the security control panel
Following one of the schematics provided below, wire the communicator to the control panel.
3.2 Wiring the 4GT to a panel key switch zone
Follow these schematics if the control panel will be armed/disarmed with the 4GT PGM output
turning on/off the panel’s keyswitch zone.
Note:
The
4GT
communicator has one programmable output OUT, which can control one alarm
system partition. Additional partitions can be controlled by adding expanders.
