Radiometer Analytical TitraLab 870, Reference Manual

Page: 221 / 286

Titra Lab ® TitraLab 870 Reference Manual
Page 221
Sample changer To automate your entire titration procedure (up to 126 samples in one
go), the SAC80, SAC90, SAC850 or SAC950 sample changers can
be connected to the
SAC socket of the Titration Manager using the
cable, part no. A95A202 (SAC80/SAC90) or A95X501 (SAC850/
SAC950).
Refer to "Sample changer cable - A95A202 (SAC80/SAC90)", page
222
.
Refer to "Sample changer cable - A95X501 (SAC850/SAC950)", page
222
.
When using a sample changer, you have to indicate to the Titration
Manager which model is used.
Enter in:
Setup menu > Configuration
Range available:
SAC80, SAC90, SAC850, SAC950, No
Depending on the sample changer used, you have to enter other
configuration parameters:
• For a SAC80 or SAC90:
Number of rinses, see "Number of static rinses", page 166 ,
Duration of a rinse, see "Rinse time", page 211 .
• For a SAC850 or SAC950:
Automatic detection of beakers, see "Beaker detection", page 64 ,
Number of rinses, see "Number of static rinses", page 166 ,
Duration of a rinse, see "Rinse time", page 211 .
Number of dynamic rinses, see "Dynamic rinses", page 102 ,
Location of dynamic rinses, see "Dyn. rinse", page 99 ,
Sequence end in Park, see "Sequence end in Park (Yes/No)", page
229 .
See also:
Edit a sequence with a sample changer:
Refer to "Programming sequence", page 181 .
Select a sequence with a sample changer:
Refer to "Select sequence", page 227 .
Run a sequence with sample changer:
Refer to "Running a SAC sequence", page 217 .