Titra
Lab
®
TitraLab 870 Reference Manual
Page 220
SAC80/SAC90/
SAC850/SAC950
Define and connect a sample changer:
Refer to "Sample changer", page 221
Edit a sequence with a sample changer:
Refer to "Programming sequence", page 181
.
Select a sequence with a sample changer:
Refer to "Select sequence", page 227
Run a sequence with sample changer:
Refer to "Running a SAC sequence", page 217
Same buffer
change buffer
This message appears at the start of an electrode calibration. The
same buffer has been programmed for 2 successive steps in the
calibration procedure.
Press
✓
and change one of the buffer values in the Solutions menu of
the electrode calibration method.
Sample amount
Enter the amount of sample used for the titration or dilution.
Enter in:
Edit method > Sample
Range available:
0.001 to 100000 (unit =
Sample unit
)
Summary of Contents for TitraLab 870
