OriginHobbies_OMP_M1_M2_TX16S_RTF_OMP_v1.1
7. Place the Helicopter on a level surface and plug in the battery to the Helicopter. Wait for
gyro initialization to complete. It will indicate with beeps and twitching servos.
8. Move Aileron, Elevator and Collective Pitch sticks on Radio and check if servos are moving
in right order and direction.
9. Fix the canopy on Helicopter.
10. Place the helicopter on the ground (flat surface) from where you want to take off.
11. Ensure that Flight mode switch (SE) is in Normal mode position. (Lowest position or
Farthest away from you)
12. Ensure throttle stick is at zero.
13. Disengage Throttle Hold switch (SG). Helicopter rotor will not yet start as throttle is zero
when throttle stick is down in Normal mode.
14. Increase throttle stick to near center and wait for RPM to stabilize.
15. Now you can take off and fly the helicopter.
Flying the Helicopter (tips):
•
Never fly near people or animals or objects as it increases the chances of crash and injury.
•
Always practice on the simulator till you are 100% confident and only then try it on the
model helicopter. Don’t try new maneuvers first on the model helicopter as it increases
chances of a crash.
•
Always keep a finger ready on throttle hold switch to engage it just before a crash to
minimize crash damage.
•
If you loose orientation you can make use of self level mode to level the helicopter right side
up. I would suggest to avoid depending on this mode. Simulator practice is the best
investment you can make in this hobby.
Landing Procedure:
1. Put helicopter in Normal mode for lowest RPM. Flight mode switch (SE) away from you.
2. Gently bring the helicopter to the landing spot and close to the ground. Choose a level
surface with no nearby obstacles for the landing spot.
3. Once the helicopter is a few centimeters from the ground, reduce throttle gently so
Helicopter lands softly on the ground.
4. Engage throttle hold (SG towards you). This will prevent accidental spool-up if throttle stick
or Idle mode switch accidentally toggles.
Flight Timer Reset:
You can quickly reset the flight timer by timer reset switch (SH). Reset the flight timer only after
replacing the battery on the model with a fully charged one.
Self level mode:
Self level mode is used to get the helicopter to right side up and self level orientation from whatever
orientation. Self level mode can be entered by self level switch SA.
As a beginner you may start with self level mode but it is not recommended to practice in this mode
as you will not develop correct hovering skills. It is recommended to use this mode only as a rescue
mode if you loose orientation in flight so you have time to recover.
If any questions feel free to contact me at
Happy Flying!
Changelog:
v1.1: Moved Idle mode switch from SA to SE. Moved Self level switch from SF to SA. This better matches T6 transmitter layout.
v1: Initial version
Page 3/3
© 2021 OriginHobbies.com
