OriginHobbies_OMP_M1_M2_TX16S_RTF_OMP_v1.1
Radio Switch Assignment (OMPHobby mode):
Switch position guide: ↑ (away from you), - (middle), ↓ (towards you)
Throttle hold switch: SG (↑Armed, -Throttle cut, ↓Throttle cut)
Flight mode switch: SE (↑Norm, -Idleup1, ↓Idleup2)
Self level switch: SA (↑Self level ON, -Self level OFF, ↓Self level OFF)
Flight timer reset switch: SH (↑Timer active, ↓Timer reset)
Volume Control: S2 knob
Flight timer: 3.5 mins, Haptic countdown at 10 seconds
Start up procedure:
1. Make sure that all switches are in home position. Away from you.
2. Turn ON the Radio.
3. Once Radio is turned ON, Engage Throttle hold switch (SG).
4. Ensure that Self level mode is OFF (SA in middle or towards you)
5. Ensure that correct model is chosen on screen “OMP M1 OMP” or “OMP M2 OMP”
depending on what helicopter you want to fly.
NOTE:
There is no model matching feature so it will still bind with the helicopter even if
you choose the wrong model. Please double check that the chosen model on the Radio
Transmitter is same as the model you want to fly.
6. To change the model, press and hold “Menu Wheel” button. Choose “Model Select”.
Highlight the required model you want and press & hold the “Menu Wheel” button. Choose
“Select Model”.
Page 2/3
© 2021 OriginHobbies.com
