RadioMaster T8, User Manual

Page: 4 / 13

Charging Instructions
Power on/off
The T8 Lite has a built in 1000mah 3.7v Battery. The built in USB-C charger will
charge your batteries by connecting the supplied USB-C cable to any suitable
USB power outlet. We suggest using a regular 1-2amp 5v USB power adapter.
Charge status and battery Level:
The 5 LEDs below the neck strap loop indicate the charging status. When the
LEDs light up from left to right the T8 Lite is charging. Each of the 5 LEDs
indicates 20% of the battery capacity. 5 LEDs shows 100% charge, 4 LEDs 80%,
3 LEDs 60%, 2 LEDs 40%, 1 LED 20%. When the radios power is low and the T8
Lite requires charging all 5 battery status LEDs will flash at the same time. Please
recharge the batter before using the radio any further
Power on: Press and hold the power button, the five status LEDs will light up
sequentially followed by a beep. Let go of the power button after you hear the beep.
Power off: Press and hold the power button, the five status LEDs will turn off
sequentially followed by a beep. Let go of the power button after you hear the beep.
Default channel order:
Status
Power Level
Recharge
Indicator light
20% 40% 60% 80% 100%
Five indicator lights indicate 0-100% power,
and on average each indicator indicates 20% power
The indicator light flashes from 1 to 5 cycles, indicating that it is
charging, and all the indicator lights are always on after the
charging is completed
CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8
Aileron Elevator Throttle Rudder
SA
2Position
SB
3Position
SC
3Position
SD
2Position
3