Logical Switches Configuration Screen
After selecting to edit a logical switch, you will have the following configuration options:
•
Func
- The logical function that you want to use. See
below for a description of the
possible functions you can use.
•
V1
- The first variable in the expression to evaluate.
•
V2
-The second variable in the expression to evaluate.
•
AND switch
- Switch that must be active to allow the logical switch to be evaluated for activation.
•
Duration
- The duration that the logical switch will remain active (true) once meeting activation criteria.
•
Delay
- Delay between when the activation criteria for the logical switch has been met and when the logical
switch changes to the activated state (true).
Logical Switch Functions
In the expression, a and b represent sources (sticks, switches, etc.), and x represents the constants (values) to
be compared.
6.
Special Functions
7.1. Configuring Special Functions
The
Special Functions
section is where you can configure the special functions that are included in EdgeTX.
These special functions add additional functionality beyond normal model controls, such as enabling trainer
mode, playing a sound, adjusting the radio backlight, adjusting radio volume, etc. On the special functions
screen, you will see all configured special functions as well as some of the configured options such as
function name, activation switch, if the function is enabled, and other configuration options.
Special Functions
Configuring Special Functions
To configure a special function, select the desired special function row and press the
[Enter]
button. Then,
scroll with the
[Roller]
to select the attribute that you want to edit (it will be highlighted) and press the
[Enter]
button to edit it (it will now be blinking). Edit the option by scrolling with the
[Roller]
and pressing
the
[Enter]
button to select the desired option. Once all the options are configured, press the
[Return]
button to exit out of editing mode for the special function.
All special functions have the configuration options below. Additional options may be added based on the
selected function. See the
Functions
section below for these additional options.
•
Trigger
- The switch or trigger that will make the special function active. Long pressing on this section will
allow you to quickly select the category of the switch and filter the results. You can select the following
filters:
Switches
,
Trims
,
Logical Switches
,
Other
and
Invert
•
Function
- The function that will be used. See below for function descriptions.
•
Enable
- Toggle on/off to enable the function. To be able to activate the special function by a switch, it must
be enabled. This option is usually the last option listed as a checkbox on the far right of the screen. Disabled
special functions will not function regardless of the configured switch position.
Summary of Contents for MT12
Page 5: ...1 3 Radio overview...
