RadioLink Electronic Limited
10
II. RC4GS V3 Functions
2.1 Display on LCD Screen
Basic Operation
When the transmitter is powered on, LCD screen shows Model Name, Transmitter Name, Transmitter Voltage,
Steering Trim, Throttle Trim, Model Voltage, Subsidiary Model ID, Returned Signal.
Note
1
The Subsidiary ID won’t display until the function is activated in the menu ID SEED.
2
The telemetry function of model battery voltage can only be realized with R8FG/R7FG/R8F.
3
When binding is done, there’s signal tower on top middle of the screen. As there’s no amplifier
module added on R6FG, the signal telemetry from receiver is about 80m(262.5ft). If the distance is longer
than 80m, the signal tower may disappear but the control range of RC4GS V3 is as long as 400m(1312ft).
