2. Large model aircraft may of some metal part interfering signal, in this case the antenna should
be placed at side of the model.
3. The antenna must be kept away from conductive materials, such as metal and carbon by at
least a half inch. The coaxial part of the antenna does not need to follow these guidelines, but
do not bend it in a small radius.
4. Keep the antenna away from the motor, ESC, and other noise sources as much as possible.
5. The receiver can be packed by sponge or foam for shocking proof when it is installed to the
model.
After all of the above steps finished, now the program functions to assure it under control of
transmitter with a right connection.
Specification:
1.
Channels: 8 channels
2.
Working voltage: 4.8-6V
3.
Working current: 30mA（input voltage: 5V）
4.
Size: 16.0*21.5*1.0mm
5.
Weight: 2.5g
6.
2048 section precision, 0.5us per section, servo anti-shake rudder.
7.
Control distance: about 2000 meters air, actually control distance depends on the
environment.
