RadioLink Electronic Ltd
3
1. R8FG Introduction
1.1 Compatible transmitters
RadioLink R8FG 2.4G 8-channel receiver, splash-proof, with integrated gyro for professional car drifting
and high voltage servo supported is compatible with RadioLink RC8X/RC6GS V3/RC6GS V2/RC6GS/
RC4GS V3/RC4GS V2/RC4GS/ RC3S/RC4G/T8FB/T8S.
1.2 Binding
Each receiver has an individual ID code and must bind with transmitter before using. When the binding is
done, the ID code will be stored in the transmitter and there’s no need to rebind. Therefore, when a new
R8FG is purchased, binding needs to be done in order to work with transmitter.
Binding steps:
①
Put the transmitter and the receiver close to each other (about 60 centimeters). Note: The close
distance between the transmitter and receiver may cause a signal block, which leads to unsuccessful
binding or signal loss.
②
Turn on both the transmitter and the receiver, and then the LED of R8FG will start flashing slowly.
③
There is a black binding button (ID SET) on the side of the receiver. Press the button for more than 1
second and release, the LED will flash quickly, indicating the binding process is ongoing.
④
When the LED stops flashing and is always on, binding is complete and there will be a signal tower
shown on top of the IPS screen of the transmitter(As shown above). If not successful, the LED will keep
flashing slowly to notify, repeat the above steps.
Note:
When the transmitter and receiver are powered on, if binding is not successful or the signal is lost,
the LED of R8FG will keep flashing to notify.
2. Telemetry
R8FG can return the real-time flight information such as RSSI, receiver voltage and model battery
voltage.
