Radiolink Electronic Limited
www.radiolink.com
Attention: R6FG default have not turn on the gyro function. Make sure the R6FG keep motionless
when power on it, because the R6FG will do the self-test.
R6FG with two indicate LED, green LED on indicate normal working mode while both green and
red LED on indicate gyro function working mode.
Working Mode
R6FG has two working modes：normal working mode and gyro function working mode.
Normal Working Mode
Green LED, gyro will not be working.
Gyro Function Working Mode
Both green and red LED on.
Receiver with gyro integrated to hold the vehicle in a straight line during aggressive acceleration
and braking or get bumped around by rough terrain.
Receiver with gyro integrated to keep the unit-direction and anti-slip.
How to Turn on Gyro Function
Quick press the ID SET switch two times within 1 second, the LED change from green to red
means gyro function has turn on.
Gyro Function Setup
Resume
Integrated Gyro, is used to assure the stability of cars on turning status; and keep on straight
running even the cars get some mechanical phantom. Gyro function can be enabled or disabled.
PARAMETER INSTRUCTION
A. Gyro enabled
Gyro preset disabled, and it enters post indication status. There are two indicators on the receiver.
The green one shows the receiver status and the red one is for gyro. When the led turns on, the
gyro is enabled, and the led turns off, gyro disabled.
B. Gyro enabled forward
Cars can be drove forward and backward, gyro is enabled forward or backward correspondingly.
Like the EP cars, different connection will make different direction, the gyro is ensured to be
enable forward.
C. Gyro reverse
Same like a plane has reverse, car kit gyro has reverse as well. Only right set reverse gyro can act
to correct.
