RadioLink Electronic Ltd
1. R4F Introduction
RadioLink R4F is a 2.4G 4 channels receiver with weight of 4g(0.14oz) and dimension of
31x11x10mm (1.18
”x0.43”x0.39”), supporting signal output of PWM and is compatible with
RadioLink transmitter T8FB/T8S/RC6GS V2/RC4GS V2/RC6GS/RC4GS/RC4G/RC3S.
2. Binding
Each receiver has an individual ID code and must bind with transmitter before using. When the
binding is done, the ID code will be stored in the transmitter and there’s no need to rebind. Therefore,
when a new R4F is purchased, binding needs to be done in order to work with transmitter.
Binding steps
1
．
Put the transmitter and the receiver close to each other (about 50 centimeters) and power
both on.
2
．
Switch on the transmitter and the LED of R4F will start flashing slowly.
3
．
There is a black binding button (ID SET) on the side of receiver. Press the button for more
than 1 second and release, the GREEN LED will flash quickly, meaning binding process is ongoing.
4
．
When the GREEN LED stops flashing and is always on, binding is complete. If not succeed,
repeat the above steps.
3. Working Mode
R4F supports PWM signal output with 4 channels in total.
4. R4F Specifications
1
）
Frequency
：
2.4GHz ISM band(2400MHz~2483.5MHz)
2
）
Dimension:
31x11x10mm(1.18”x0.43”x0.39”)
3
）
Weight: 4g(0.14oz)
Antenna Binding Button
(ID SET)
CH1 Rudder
CH2 Throttle
CH3 Aux
CH4 Aux
Signal VCC GND
