Radiolink Electronic Ltd
22
3.6 Flight Modes
crossflight has 20 flight built-in flight modes, 10 of which are regularly used. There are modes to support
different levels/types of flight stabilization, a sophisticated autopilot, a follow-me system etc. Flight modes are
controlled through the radio (via a transmitter switch), via mission commands, or using commands from a
ground station (GCS) or companion computer. You can setup six flight modes once and max setup eight
modes combine with AUX-CH (CH7 and CH8).
Flight modes setting steps:
1. Connect crossflight and receiver (connect the RC port of crossflight, and make sure receiver work as SBUS
signal).
2. Make sure transmitter bind to receiver success.
3. Make sure crossflight connect to Mission Planner success and click INITIAL SETUP—Mandatory
Hardware—Flight modes, you can setup the flight modes you want in this menu.
In flight modes menu, it’s very clear that the flight modes, the PWM numerical interval of six flight modes you
have set and choose Simple Mode/Super Simple Mode or not.
Most of the RC fans setup the Flight Mode 1 is Stabilize, the other five flight mode will be setup according to
users’ flight habit.
First, you have to setup flight mode in transmitter. The setting steps as below:
1. Power on and turn on your transmitter.
2. Press Mode button twice to into ADVANCE MENU, press Push button into ATTITUDE setting menu,
CH5 is default to the attitude control channel and please choose a 3 Posi-SW and a 2 Posi-SW to control
the attitude.
Summary of Contents for Crossflight
Page 6: ...Radiolink Electronic Ltd www radiolink com 3 1 crossflight Introduction 1 1 Spare Parts...
Page 7: ...Radiolink Electronic Ltd www radiolink com 4 1 2 Connectors...
Page 43: ...Radiolink Electronic Ltd www radiolink com 40 Octocopter Y6 X8 Tricopter...
Page 62: ...Radiolink Electronic Ltd www radiolink com 59...
