RadioLink Electronic Ltd
7
The first green LED is always
on, and the second green
LED is flashing
The battery voltage is higher than 7.4V and lower than 7.8V.
The front two green LEDs
are always on, and the third
green LED is flashing
The battery voltage is higher than 7.8V and lower than 8.2V.
The front three green LEDs
are always on, and the fourth
green LED is flashing
The battery voltage is higher than 8.2V and lower than 8.4V.
All four green LEDs are
always on
The battery is fully charged.
6. Voltage Calibration of CM210
Three power supplies are required. Two 5V power supplies at the battery end, with 0.1A current.
When the battery end is connected, turn on the battery end power supply. The voltage of the
charging end power supply is set to 5V, with 3A current. When the power supply end is
connected, turn on the charging end power supply. Then the MCU runs the calibration program
inside . When all the green LED indicators are on at the same time and then go out, the
calibration is completed
Thank you again for choosing RadioLink product.
