background image

RadioLink Electronic Ltd

www.radiolink.com

3

1. Safety Precautions

(1) Please read this manual carefully before using to make sure CM210 is safely operated.

(2) Please connect CM210 to the power supply first, and then connect the 2S LiPo battery for

charging.

(3) Keep the charger always away from children and pets.

(4) Keep the charger supervised when charging.

(5) If the battery has any abnormalities such as leakage, bulging, peeling of the outer skin,

color change or deformation, please do not charge.

(6) Do not refit or disassemble the charger.

(7) Do not keep the charger or battery close to a combustible material while in use.

(8) Do not try to charge "non-rechargeable" dry cells.

Thanks for choosing RadioLink CM210 balance charger. To fully enjoy the benefits of this

product and ensure safety, please read the manual carefully. If any problems found during the

operation process, either way listed below can be used as online tech support.

(1) Send mails to [email protected] and we will answer your question at the

earliest.

(2) Send private message to us on our Facebook page or leave comments on our YouTube

page.

(3) If the product is purchased from the local distributor, you can also ask them for support and

repair as prefer.

Note: Do not allow children (Less than 14 years old) to touch this product. This product is not a

toy. Please be careful when operating in scenes where children are present.

Summary of Contents for CM210








Reviews: