Page
9
of
11
Without making any changes to this page, click next. Now the O2 Surf will reboot.
Connecting the O2Wind to your computer for configuration.
Connect a Category 5 Ethernet cable between your PC/MAC’s ethernet port and the
LAN
port of the O2Wind
Attach the antenna(s) to the O2Wind
Connect the included power cable to the router and connect to your power source. Your
O2Wind is now booting up. Please give it one to two minutes to fully boot up.
Open a web browser (Internet Explorer, Mozilla Firefox, Safari, etc.) and enter
192.168.1.1 into the address bar and hit “Enter”.
This will bring you to the RadioLabs Setup Wizard
