RD8000 Operation Manual 1
Section 1. – Introduction
1.1 About this manual
This manual provides cable and pipe survey professionals
with comprehensive operating instructions for the
RD8000 receiver and transmitter system. Before
operating the RD8000 system it is very important that you
read this manual, noting all safety warnings
and procedures.
1.1.1 Additional documentation
This manual introduces the Centros Manager software
suite but provides only limited installation and operating
instructions. The Centros Manager and SurveyCERT
manuals are available to download from
www.radiodetection.com.
1.2 About the RD8000
The RD8000 system provides cable and pipeline locators
with a fast, effective means of locating and mapping
buried utilities.
The RD8000 product family includes two powerful
receivers and three transmitters offering one, three or
ten watt power output. Each transmitter and receiver is
compatible with all RD4000 accessories.
The RD8000 receiver is ergonomically designed to
provide the operator with a balanced, light weight tool
that encourages extended use in most environments.
1.3 Manual outline
The rest of this section provides an overview of safety
procedures and notices. Please review them before
moving on to Section 2 and the rest of this manual
Section 2 provides an overview of the RD8000 system
with annotated diagrams of the receiver and transmitter
Section 3 introduces basic setup and operation using the
RD8000’s menu system.
Section 4 introduces SurveyCERT for survey
measurement and analysis.
Section 5 provides instructions on how to pair your
RD8000 to your PDA or PC using
Bluetooth
®
wireless
technology.
Section 6 introduces iLOC, Radiodetection’s advanced
remote control technology that allows you to control the
transmitter using the RD8000 receiver.
Section 7 introduces the theory and practice of cable and
pipe location using the RD8000 receiver and transmitter.
Section 8 introduces depth and current readings.
Section 9 provides general locating tips.
Section 10 introduces the range of accessories that are
compatible with the RD8000.
Section 11 introduces cable sheath fault-finding using the
RD8000 and an accessory A-frame.
Section 12 introduces current direction (CD) mode.
Section 13 includes several appendices with reference
material and other technical information.
1.4 Safety
Please read this manual in its entirety before attempting to
operate the RD8000 receiver or transmitter. Note all safety
notices in the preface and throughout this manual.
Follow your company and national safety procedures
and or requirements when operating this equipment in
any environment or workplace. If you are unsure what
policies or procedures apply, contact your company or
site’s occupational health and safety officer or your local
government for more information.
Do not use this equipment if you suspect that any
component or accessory is damaged or faulty.
Use authorized accessories only. Incompatible
accessories may damage the equipment or give
inaccurate readings.
Do not use iLOC™ or
Bluetooth
®
in areas where wireless
communication devices are considered hazardous. Check
local authorities for more information.
Keep this equipment clean and arrange for regular
services with an authorized Radiodetection service center.
More information can be found in the Appendix or from
your local Radiodetection representative.
Do not attempt to open or dismantle any part of this
equipment unless directed specifically by this manual.
Doing so may render the equipment faulty and may void
the manufacturer’s warranty.
