RD8000 Operation Manual 11
To adjust transmitter audio levels:
Switch on the transmitter.
Press the key to enter the menu.
Scroll to the VOL option using the
or
arrows.
Press the
key to enter the VOL menu.
Use the or arrows to select the desired
volume level where 0 is mute and 3 is loudest.
Press the key to accept the change and exit.
Press the key to exit the menu.
3.14 Backlight
The transmitter and receiver feature a backlight to
improve LCD visibility when required. The receiver’s
backlight is controlled by an ambient light sensor and
does not require adjustment by the user.
The transmitter’s LCD backlight is activated whenever
you press a key. The backlight will automatically switch off
after a few minutes.
3.15 Transmitter power output
The transmitter supports several power output modes to
help you select the optimal settings for your requirements
whilst helping to prolong battery life.
3.15.1 Adjusting power output
NOTE: On iLOC enabled models, you can adjust the
transmitter’s power output remotely using the receiver.
For more information, please refer to Section 6.
To adjust the power output:
Switch on the transmitter.
Press the or keys to increase or decrease
power output.
3.15.2 Boost (Tx3 and Tx10 only)
Boost allows the transmitter to output its maximum
wattage for a specified period of time in minutes.
WARNING! The transmitter is capable of
outputting potentially lethal wattages. Exercise
extreme caution when using Boost.
1.
2.
3.
4.
5.
6.
7.
1.
2.
To confiure boost:
Switch on the transmitter.
Press the key to enter the menu.
Scroll to the BOOST option using the or
arrows.
Press the key to enter the BOOST menu.
Set the BOOST duration using the or
arrows. You can choose 5, 10, 15 and 20 minute
periods.
Press the key to accept your changes and exit
the BOOST menu.
Press the key to exit the menu.
To enable boost:
First configure the boost duration using the
procedure above.
Press and hold the arrow until BOOST
appears on the transmitter LCD.
The transmitter will automatically exit boost mode
after the allotted duration.
To disable boost
Press and hold the arrow to switch boost off.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
1.
