manualshive.com logo in svg

Radiodetection 3300, Operation Manual, Page: 53 / 60

Share
Download
Radiodetection 3300 Operation Manual Download Page 53

SECTION 6:  MAINTENANCE

Cleaning

Remove dust from the outside of the instrument and con-

nectors with a lint free cloth or a small, soft brush.

Clean the case and instrument with a mild soap and water

cleanser. Make sure the cloth is only 

damp 

to avoid getting

water in the instrument.

Do not use harsh chemicals or abrasive cleaners. Damage

to the front panel overlay may result.

Periodic Inspection

To maintain the TDR in peak operating condition, periodi-

cally inspect the instrument and accessories to make sure

there is no damage, worn or missing parts or deformations

in the enclosure.

If the unit is regularly operated in harsh, dusty or wet envi-

ronments, inspect after every use.

The instrument should be inspected and cleaned periodi-

cally. Inspect the front panel connectors for dirt, broken or

deformed insulation and contacts. Clean or replace as nec-

essary.

Inspect cable accessories for damaged insulation, bent or

broken clips. Replace as necessary.

Summary of Contents for 3300





























































Reviews:

No comments