Visit Radioddity.com For Downloads And Help 17
Visit Radioddity.com For Downloads And Help 18
Chapter 5. Bluetooth program
Chapter 6. Trouble shooting
Channel Storage
CH-Memory
This menu is used to store the frequency set in frequency mode and related
parameter information.
CH-Delete
This menu is used to delete the programmed information from the specified
channel (0 through 127) so that it can either be programmed again or be left
empty. Delete channel parameters for the specified channel. If no “CH-”
indicates that the channel has no parameters, the operation is invalid.
CH-Edit Name
This menu is used to edit the channel name only valid in channel mode
Operation: Menu --- Channel Storage --- CH-Memory/CH-Delete/CH-Edit
Name --- Select 000-CH-127/000-CH-127/Edit Name--Menu----EXIT.
Search Frequency Mode
Search the other radio’s TX frequency and CTCSS/DCS Code when it is in
transmitting.
Operation: Menu --- Search Frequency
PTT-ID
This feature allows you to know who call you. Transmit ANI code or DTMF
code through DTMF. DTMF code has total 15 groups. In the PC software--
Edit--DTMF setting, each signal or A/B band can independently select the
call code group to be sent.
In the PC software--Edit--DTMF--ANI Code to set ANI code.
Press to Send --- Transmit the code while push the PTT button.
Release to Send---Transmit the code while release the PTT button.
BOTH---Transmit the code while push or release the PTT button.
Note: Since the ANI code operation is independent of the DTMF code. If the ANI
code conflicts with the DTMF code setting, the ANI code is sent.
Press [MENU] Key to select Bluetooth to turn on this function.
After connecting the walkie talkie through the mobile phone Bluetooth, you
can modify the frequency, channel information, function setting on the
dedicated APP. The Bluetooth function will turn off automatically after finished
the programming on the APP.
Note: When Bluetooth programming function is on, the radio cannot program via
programming cable.
If the solutions below cannot fix the problems for you, or you may have some
other queries, please contact us o for more technical support.
Analysis
Phenomena
Solution
Power-on
Failure
The battery may be
improperly installed.
The battery power
may be used up.
The battery is poorly
connected due to
dirtied or damaged
battery contacts.
Remove the battery and
reassemble it.
Recharge or replace the battery.
Clean the battery contacts. If the
problem cannot be solved, contact
your dealer or authorized service
center for inspection and repair.
