41
42
Menu
Name
(Full Name)
Setting
Description
30
Tail
OFF[ 0 ] | ON [ 1 ]
This function is used eliminate squelch
tail noise between Radioddity
handholds that are communicating
directly (no repeater).
Reception of a 55 Hz or 134.4 Hz tone
burst mutes the audio long enough to
prevent hearing any squelch tail noise.
32
RPT-RL
OFF [ 0 ] | 1 - 10
Delay the Tail Tone of Repeater (X100
milliseconds)
33
ROGER
OFF [ 0 ] | ON [ 1 ]
Sends an end-of-transmission tone to
indicate to other stations that the
transmission has ended.
31
RP-STE
OFF [ 0 ] | 1 - 10
This function is used eliminate squelch
tail noise when communicating through
a repeater
Menu Name
(Full Name)
Setting
Description
26
Delete
000-127
Deletes channel parameters for the
specified channel, If no “CH-” indicates
that the channel has no parameters,
the operation is invalid.
27
Alarm
Mode
On site [ 0 ]: Sounds alarm
through your radio speaker
only.
Send sound [ 1 ]
:
Transmits
a cycling tone over-the-air.
Send code[ 2 ]
:
Transmits
‘119’ (911 in reverse?)
followed by the ANI code
over-the-air.
None
28
Scan
CTCSS
63.0Hz, ......, 254.1Hz
Automatic stop after receiving the
CTCSS signal
29
Scan
DCS
D023N, ....., D754I
Automatic stop after receiving the
DCS signal
