Radiocrafts
Embedded Wireless Solutions
RC2300DK
2007 Radiocrafts AS
RC2300DK- Demonstration Kit Quick Start (rev. 1.0)
Page 1 of 3
RC2300DK- ZigBee
®
-ready Demonstration Kit
Quick Start
Introduction
The RC2300DK demonstration kit includes a preloaded program to enable simple RF range
tests. This document is a guide to using the preloaded FW.
Other FW can be downloaded to the module when using the kit as a development kit. Please
see User Guide for more info on this.
Quick Start Guide
To use the simple test FW follow the steps below:
1. Connect the RS232 port to a PC using a 1:1 serial cable for each board (can also be
an emulated RS232 over USB).
2. Start a terminal program on the PC (like Microsoft HyperTerminal) for each board.
Settings should be as shown in figure 1 and 2.
