Page
21
of
27
USER MANUAL RC1882-RIIM-DK DEVELOPMENT KIT
2019 Radiocrafts AS
User Manual RC1882-RIIM-DK Development Kit Rev. 1.00
Prototyping with the Sensor Board
The sensor board is well suited for prototyping/bread boarding. With all I/O pins easily accessible at the edge,
connection to external boards can be made through board stacking with standard pin headers or cabled with
standard 2.54 mm pitch cable.
With angled header mounted on I/O connector, the sensor board can also be mounted vertically to other boards
with 2.54mm pitch connectors.
The idea is that an external application specific circuitry/sensors etc. easily can be connected to the sensor
board as a proof of concept for the final product.
The sensor board is built to fit a commercially off the shelf enclosure named
Router Cube
from New Age
Enclosure. Available at Mouser. The sensor board is not delivered with enclosure. Machining for
connectors/antenna is required.
Figure 10 Optional enclosure from New Age Enclosures
