PG
12
PG
13
Congratulations, you have successfully installed your unit. Please proceed to
the OPERATING Guide to initialize the CT30.
IMPORTANT:
If you have labeled and connected your
wires and followed the correct HVAC setup, and your
system still does not operate, contact technical support at
[email protected] or call 1-877-602-5028 8am-
Midnight EST.
STATEMENT OF USE: This thermostat can be used
with 3AA batteries, 24VAC (C wire), 24VAC adapter,
heating and cooling systems and also millivolt heating.
It cannot be used with line voltage systems. This
thermostat is digital and your desired heat or cool
temperatures can easily be set on the large touch
screen with the +/- buttons. A minimum 4 minute off
time protects the compressor from damage.
This thermostat runs on 3AA batteries. It can also run on the HVAC systems 24VAC (C wire) or
external 24VAC transformer connected to the C and RH terminals. The 24VAC “C” wire is the other
side of the 24VAC heating transformer and can be found where the other thermostat wires connect at
the wall or at the furnace. Do not use the common or ground side of the line voltage.
Mode
button
HEAT
OFF
COOL
Fan
button
DAY
F
LINK
RADIO
TARGET TEMP
1
COOL
AUTO
PM
Summary of Contents for CT30
Page 19: ...PG 19 Notes on your system...