![background image](http://html1.mh-extra.com/html/radio-shack/trs-80-cr-510/trs-80-cr-510_operation-manual_3298152007.webp)
Figure 3. CR-510 (Rear View)
DIP Switches Position the DIP Switches to set the baud rate. The DIP Switches are located
behind the metal plate (see Figure 7 for details). The CR-5l0's baud rate must match the
baud rate of the Computer. (See Setting Up the CR-510 for details.)
RS-232C Connector Connect the CR-510 to the TRS-80 via this connector using the
appropriate interface.
Power ON/OFF Switch To turn the CR-510 power ON, set this switch to ON. (When power
is applied, a unit Self-Test is automatically run.)
Power Cord Connector Plug the AC Power cord included with package into this connector.
Fuse Holder The fuse provides unit overload protection. Replace with a 1 amp slo-blo fuse
for 110 VAC.
Summary of Contents for TRS-80 CR-510
