background image

Priority

The priority feature lets you scan through 
the channels and still not miss important or 
interesting calls on specific channels. You can 
program any stored channel as a priority channel. 
If the priority feature is turned on, the scanner 
checks the priority channels for activity every two 
seconds.
To set a channel as a priority channel:
1.   Enter the channel number you want to select 

as a priority channel, then press 

SCAN/MAN

.

2.   Press 

E

PGM

.

3.   Press 

E

PGM

 again. The Channel Menu 

appears.

4.   Rotate the knob to select 

3: Priority CH

, then 

press 

E

PGM

5.   Rotate the knob to select 

1: On

, then press 

E

PGM

.

6.   Press 

Menu

 to exit Menu. 

P

 appears.

7.   Repeat above steps for other channels you 

want to program as a priority channel.

To turn on the priority feature in scan mode or 
manual mode, press 

Func

 + 

1/PRI

PRI

 appears. 

Then the scanner checks the designated priority 
channels every 2 seconds.
To turn off the priority feature, press 

Func 

1/PRI

 

again.

Note:

 If you have locked out all priority 

channels, 

Priority Scan No Channel

 appears when 

you activate the priority feature and the 
priority feature is cancelled. 

Summary of Contents for RPO-137













































Reviews: