Radio Shack PRO-97, Manual

Page: 13 / 16

8/17/2015 Easier to Read Pro­97/2055 Scanner Manual
http://marksscanners.com/97/97.shtml#open_closed 13/16
1 153.770­154.130 15
154.145­154.445 15
155.010­155.370 60
155.415­155.700 15
155.730­156.210 60
158.730­159.210 60
166.250
170.150
2 453.0375­453.9625 12.5
458.0375­458.9625 12.5
460.0125­460.6375 12.5
465.0125­465.6375 12.5
3 851.0125­860.9875 25
866.0125­868.9875 12.5
Grp Frequency Step
0 28.0­29.7 5
1 50­54 5
2 144­148 5
3 222­225 5
4 420­450 12.5
5 1240­1300 6.25
9 156.450 23 157.150 66 156.325 83 157.175
10 156.500 24 157.200 67 156.375 84 157.225
11 156.550 24 161.800 68 156.425 84 161.825
12 156.600 25 157.250 69 156.475 85 157.275
13 156.650 25 161.850 70 156.525 85 161.875
14 156.700 26 157.300 71 156.575 86 157.325
15 156.750 26 161.900 72 156.625 86 161.925
16 156.800 27 157.350 73 156.675 87 157.375
17 156.850 27 161.950 74 156.725 87 161.975
18 156.900 28 157.400 77 156.875 88 157.425
8 27.055 28 27.285
9 27.065 29 27.295
10 27.075 30 27.305
11 27.085 31 27.315
12 27.105 32 27.325
13 27.115 33 27.335
14 27.125 34 27.345
15 27.135 35 27.355
16 27.155 36 27.365
17 27.165 37 27.375
18 27.175 38 27.385
19 27.185 39 27.395
20 27.205 40 27.405
5 462.6625 19 462.650
6 462.6875 20 462.675
7 462.7125 21 462.700
8 467.5625 22 462.725
9 467.5875 23 151.820
10 467.6125 24 151.880
11 467.6375 25 151.940
12 467.6625 26 154.570
13 467.6875 27 154.600
14 467.7125
Limit Search
Contents
To Program a Limit Search, press PGM then SRCH. Enter SR6 Search appears at the top and the previous lower and upper search limits are shown. Enter the lower limit frequency then press
ENT. Enter the upper limit frequency then press ENT. Press SRCH to start searching.
To Start a Limit Search, press SRCH until Limit Search appears in the display. The scanner should start searching. Pressing FUNC then will restart searching up from the lowest frequency.
Pressing FUNC then will restart searching down from the highest frequency.
To Text Tag a limit search, See Text Tagging a Limit Search .
To change search directions, press the or button. An arrow in the upper left of the display shows the direction.
To turn the Seek feature on or off, press FUNC then 7 while searching. Seek ON or OFF will briefly appear on the bottom line. will appear in the right of the display when the 'seek'
feature is on.
To Pause on a frequency, quickly press PSE to stop searching and listen to the transmission. **PAUSED** appears in the display. To continue searching, press PSE again.
To Step through the frequencies one at a time, press PSE. Press the or button to step through the frequencies. To resume searching, press PSE again.
To Lock out a frequency, quickly press L/OUT while the frequency is displayed.
To Unlock a frequency, See Locking/Unlocking Search Frequencies .
To Attenuate the search, press ATT while searching. att will turn to ATT in the display when the attenuator is on.
To turn the Delay on for the search, press DELAY to pause before searching resumes after the transmission ends. dly will turn to DLY in the display when the delay is on. .
To change the Receive Mode, press MODE to select a different mode. The receive mode will go to 'small' letters in the display until you press FUNC then MODE to reset the scanner to
receive the default mode for the band.
To turn Zeromatic Tuning on or off, press FUNC then 0. The ZM in the display will turn to 'capital' letters when Zeromatic is turned on.
To Copy a frequency into a channel, quickly press FUNC then PGM. Then see Frequency Copy .
To Copy a frequency into the priority channel, quickly press FUNC then PRI while the channel is displayed. The display will flash twice and the frequency will be copied into the priority
channel.
To exit searching, press MAN or SCAN.
Tune Search Contents
To start a searching at a specific frequency, press TUNE. TUNE and the previous frequency appear in the display and the scanner will automatically start searching. Enter the frequency where
you want the scanner to start searching then press ENT to start a new search.
To start a searching at a displayed channel, in manual, pause, or scan mode press FUNC then TUNE. Press PSE to start searching.
To change search directions or resume searching, press the or button. An arrow in the upper left of the display shows the direction.
To Pause on a frequency, quickly press PSE to stop searching and listen to the transmission. **PAUSED** appears in the display. To continue searching, press PSE again.
To Step through the frequencies one at a time, press PSE. Press the or button to step through the frequencies. To resume searching, press PSE again.
To Attenuate the search, press ATT while searching. att will turn to ATT in the display when the attenuator is on.
To turn the Delay on for the search, press DELAY to pause before searching resumes after the transmission ends. dly will turn to DLY in the display when the delay is on.
To change the Receive Mode, press MODE to select a different mode. The receive mode will go to 'small' letters in the display until you press FUNC then MODE to reset the scanner to
receive the default mode for the band.
To Copy a frequency into a channel, quickly press FUNC then PGM. Then see Frequency Copy .
To Copy a frequency into the priority channel, quickly press FUNC then PRI while the channel is displayed. The display will flash twice and the frequency will be copied into the priority
channel.
To exit searching, press MAN or SCAN.
Seek Function
When the seek function is on, the scanner will stay on a frequency for up to 5 seconds then automatically continue searching.
To turn the Seek feature on or off, press FUNC then 7 while searching. Seek ON or OFF will briefly appear on the bottom line. will appear in the right of the display when the 'seek'
feature is on.
Note: The seek feature does not work during a Tune search.
Frequency Copy
Contents
To Copy a frequency into a specific channel, quickly press FUNC then PGM while receiving a frequency. Store in ChXXX? appears and the frequency will blink. Press the bank number and
channel number (ex:002) then ENT to store the channel. It will also store the receive, attenuate, and delay settings. Channel Stored! will appear and the scanner will resume searching.
Note: You cannot copy a Marine channel into a bank.
Note: If you try to copy a frequency that is already stored, the scanner beeps 3 times and Dupl.Freq.Chxxx appears. To copy anyway press ENT otherwise press CL to cancel.
To Copy a frequency into the first available channel in bank 9, quickly press FUNC then ENT. Bank 9 Store? appears. Press ENT to copy the frequency into the first available (vacant) channel in
bank 9 or, press the desired bank number then ENT to store into the first available channel of the desired bank. Channel Stored! will appear and the scanner will resume searching.
To Copy a frequency into the priority channel, quickly press FUNC then PRI. The display will flash twice and the frequency will be copied into the priority channel.
Zeromatic Tuning
Whenever this feature is turned on, Zeromatic ON briefly appears then zm will turn to ZM and the scanner will tune to the correct center frequency (or the step increment closest to the correct
center frequency). When searching with Zeromatic off, ZM turns back to zm and the scanner will unmute faster on a detected signal but the frequency may not be the correct center frequency.
Zeromatic works only in search bands SR3, SR4, SR5 and SR6.
To turn Zeromatic Tuning on or off for the band, press FUNC then 0 when searching.
Locking/Unlocking Search Frequencies
You can skip (lock out) any frequency in search bands SR0­2, and up to 50 frequencies in each of the other search bands SR3­6. This lets you avoid unwanted frequencies or those already
stored in a channel.