Radio Shack pro 95 - 1000 Channel Dual-Trunking Scanner Radio Owner'S Manual Download Page 67

Page: 67 / 92

unk

EVIEWING

OCKED

-O

ALK

ROUP

You cannot clear all lockouts from
a talk group at the same time.

1. Press

PGM

then

TRUNK

2. Press

FUNC

. Then

L/OUT

. The

locked out ID appears. If the
ID memory bank has no
locked-out ID, you hear the
low beep tone.

3. Press

FUNC

then

select a search bank. Or, just
press

to search for

any locked out IDs in a bank.

LEARING

ALK

ROUP

1. Press

PGM

then

TRUNK

2. Press

FUNC

select ID memory.

3. Press

FUNC

then

LEARING

ALK

ROUP

ANK

You can clear all talk group IDs
within a bank. This lets you quickly
delete all talk group IDs from a
bank if you want to use the bank to
store different data (such as a new
set of talk group IDs).

1. Press

PGM

2. Press

TRUNK

to enter a talk

group ID memory mode.

3. Select a talk group ID bank

using

FUNC

Summary of Contents for pro 95 - 1000 Channel Dual-Trunking Scanner Radio





























































































Search results

Summary of Contents for pro 95 - 1000 Channel Dual-Trunking Scanner Radio

Reviews:

Radio Shack pro 95 - 1000 Channel Dual-Trunking Scanner Radio, Owner'S Manual, Page: 67 / 92

Search results

Summary of Contents for pro 95 - 1000 Channel Dual-Trunking Scanner Radio

Reviews: