20
21
Scanner Cloning
If you have access to a compatible scanner that is
already programmed for your area, you can transfer
that scanner's programming using a standard stereo
patch cord (not included), terminated with 1/8” male
stereo plugs at each end.
The PRO-651 is compatible with the following
scanner models: PRO-106, PRO-197, PRO-651,
PRO-652, GRE PSR-500, PSR-600, Whistler
WS1040, and WS1065.
To clone a scanner:
1.
Connect the two scanners at their
PC/IF
ports.
2.
Turn on both scanners.
3.
On the source scanner, press
PGM
.
4.
Press the
GLOB
softkey.
5.
Use the 4-direction keypad to locate the
Clone
Send
option.
6.
Press
SEL
to transfer data.
NOTE:
Working memory and global settings are
transferred but not V-Scanner folders. The target
scanner's working memory will be overwritten.
In some cases, the CCDump output may interfere
with cloning.
To turn off CCDump:
1.
Press
PGM
.
2.
Press
FUNC
and then the
GLOB
softkey.
3.
Use the 4-direction keypad to locate the
CCDump
option and change the setting.
4.
Press the
Save
softkey.
Manual Programming
Modern radio systems can be complex and
challenging to program. If you choose to program
your scanner manually, refer to the "Manual
Programming Guide" on page 55.
