PRO-2041 Scanner
(200-0463) Troubleshooting Faxback Doc. # 38901
If your scanner is not working as it should, there suggestions might help
you eliminate the problem. If the scanner still does not operate
properly, take it to your local Radio Shack store for assistance.
Problem Possible Causes Remedies
The scanner does not The AC power cord is Be sure the scanner
work at all. not properly connected. is plugged into a
working AC outlet.
The optional DC Be sure the power
power cord is not cord is fully
connected. inserted into the DC
13.8 V.
Poor or no reception. Improperly connected Be sure the antenna
antenna. is properly
connected.
Programmed frequencies Avoid programming
are the same as birdie frequencies listed
frequencies. under "Birdie Fre -
quencies" in the
"General Guide to
Scanning," Faxback
Doc. # 38900 or only
select them
manually.
Error appears. Programming error. Enter the frequency
correctly, including
the decimal point.
Keys do not Undetermined error. Turn the scanner off
work or display then on again, or
changes. reset the scanner.
Scanner is on SQUELCH is not correctly Adjust SQUELCH
but does not adjusted. clockwise.
scan.
In the scan mode, Birdies. Avoid programming
the scanner locks frequencies listed
on frequencies that under "Birdie
have an unclear Frequencies" in the
transmission. "General Guide to
Scanning," Faxback
Doc. # 38900 or
only listen to
them manually.
RESETTING/INITIALIZING THE SCANNER
If the scanner's display locks up or does not work properly after you
connect a power source, you might need to rese t or initialize it.
IMPORTANT: If you have problems, first try to reset the scanner. If that