20
Operation
To have the alarm’s siren sound about 30 seconds af-
ter the sensor detects motion, set the slide switch to
DELAY
.
To arm the sensor alarm, press
ARM
on the main unit
or on the remote control. At either the
INSTANT
or
DE-
LAY
setting, you have 10 seconds to leave the sensor
alarm’s coverage area. During this exit delay, the
main unit beeps every second and its red indicator
flashes. At the end of the 10-second delay, the main
unit beeps twice, the indicator flashes about every 5
seconds, and the sensor alarm is armed.
If you arm the sensor alarm in the
INSTANT
setting,
when the alarm detects motion in the protected area,
the alarm siren sounds immediately and the indicator
stays on.
If you arm the sensor alarm in the
DELAY
setting,
when the alarm detects motion in the protected area,
PROG
PANIC
ARM
CODE
LEARN
PROG
1
2
3
4
6
7
8
9
0
5
49-329.fm Page 20 Thursday, June 1, 2000 7:46 AM
