11
Preparation
“Arming and Disarming the Sensor Alarm” on
Page 19).
Remote Control
Each time you remove and replace the batteries in
the main unit, you must program the main unit to rec-
ognize the remote control’s signals. If you change the
security code, there is no need to reprogram the main
unit; it will still recognize the remote signals. Follow
these steps to program the main unit so you can use
your remote control.
1. Set the slide switch to either of the
ARM
settings.
2. Press
PROG
. The sensor alarm beeps once and
its green PROG indicator lights.
3. Press
LEARN
. The sensor alarm beeps twice and
its PROG indicator flashes slowly.
PROG
PANIC
ARM
CODE
LEARN
PROG
1
2
3
4
6
7
8
9
0
5
49-329.fm Page 11 Thursday, June 1, 2000 7:46 AM
