background image

2

FEATURES

© 1995 Tandy Corporation.

All Rights Reserved.

COM-LOK and Radio Shack are registered trademarks used by Tandy Corporation.

Your Radio Shack ET-532 10-Channel
Cordless Telephone with LCD Display
offers the latest advances in cordless
phone technology, and includes these
features:

LCD Display — lets you see phone
numbers as you dial them or recall
them from the ET-532’s memory.

10-Channel Selector — lets you eas-
ily select the channel with the best
range and least interference.

Advanced Super CCT Circuitry  —
provides clarity comparable to a cord-
ed phone, reduces background noise,
and increases effective operating dis-
tance.

COM-LOK — ensures that other cord-
less phone users cannot use your
phone line while the handset is on the
base.

Automatic Security Access Code —
changes each time you return the
handset to the base to help prevent
other cordless phone users from using
your phone line while the handset is off
the base.

Flash — sends an electronic switch-
hook signal for use with special phone
services such as call waiting.

Handset Volume Control — lets you
control the volume of the sound you
hear through the handset.

Lighted Keypad — lights when you
press a key or when the phone rings to
make the phone easy to use in a dark
room.

Redial — quickly redials the last num-
ber dialed with the touch of a button.

Touch Tone or Pulse (Rotary) Dial-
ing
 — lets you connect your phone to
either type of service.

30-Number Memory Dialing — lets
you store 30 phone numbers in memo-
ry for easy dialing.

Please read this Owner’s Manual care-
fully so you can enjoy all of your tele-
phone’s features.

Important:  Cordless phones such as
this one require AC power to operate.
When the AC power is off, you cannot
dial out or receive incoming calls using
your ET-532. For this reason, the ET-
532 cordless phone should not be your
only telephone. To be safe, you should
also have a phone that does not require
AC power to operate (not a cordless
phone) so you can still make and receive
calls if there is an AC power failure.

43-1032.fm  Page 2  Tuesday, August 17, 1999  9:41 AM

Summary of Contents for ET-532





















Reviews: