Radio Shack ET-531 Owner'S Manual Download Page 20

RADIO SHACK

A Division of Tandy Corporation

Fort Worth, Texas 76102

8A5

Printed in Hong Kong

Your phone might cause TV or radio
interference even when it is operating
properly. To determine whether your
phone is causing the interference, turn
off your phone. If the interference goes
away, your phone is causing the inter-
ference. Try to eliminate the interfer-
ence by:

• Moving your phone away from the

receiver

• Connecting your phone to an AC

outlet that is on a different electri-
cal circuit from the receiver

• Contacting your local Radio

Shack store for help

If you cannot eliminate the interfer-
ence, the FCC requires that you stop
using your phone.

LIGHTNING

Your phone has built-in protection cir-
cuits to reduce the risk of damage from
surges in phone line current. These
protection circuits meet or exceed FCC
requirements. However, lightning strik-
ing the phone lines can damage your
phone.

Lighting damage is not common. Nev-
ertheless, if you live an area that has
severe electrical storms, we suggest
that you unplug your phone during
storms to reduce the possibility of
damage.

RADIO SHACK LIMITED WARRANTY

This telephone product is warranted against manufacturing defects in material and workmanship for one (1) year
from the date of purchase from Radio Shack company owned stores and authorized Radio Shack franchisees and
dealers. Within this period bring your Radio Shack sales slip as proof-of-purchase date to any Radio Shack
store.
This warranty does not cover damage or failure caused by or attributable to Acts of God, abuse, misuse, improper
or abnormal usage, faulty installation, improper maintenance, lightning or other incidence of excess voltage, or
any repairs other than those provided by a Radio Shack Authorized Service Facility, or transportation costs. Radio
Shack is not responsible or liable for indirect, special, or consequential damages arising out of or in con-
nection with the use or performance of the product or other damages with respect to loss of property,
loss of revenue or profit, or costs of removal, installation or reinstallation. 
EXCEPT AS PROVIDED HEREIN, RADIO SHACK MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED
WARRANTIES ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES
CONTAINED HEREIN. Some states do not allow the limitation or exclusion of incidental or consequential dam-
ages and some states do not allow limitation or exclusion of implied warranties; therefore, the aforesaid limita-
tion(s) or exclusion(s) may not apply to the purchaser. There will be charges rendered for repairs to the product
made after the expiration of the aforesaid one (1) year warranty period.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

We Service What We Sell

9/94

43-1031.fm  Page 20  Tuesday, August 17, 1999  9:24 AM

Summary of Contents for ET-531





















Reviews: