25
OPERATING THE TAD
FROM A REMOTE LOCATION
1. Dial your phone number. Even if the TAD is off, it will turn
on and answer after about 10 rings.
2. After the outgoing message plays and the TAD beeps,
enter your remote operation security code.
Note: If you pause for 10 seconds between digits, the TAD
hangs up.
3. Enter the remote command (see “Remote Commands” on
Page 24).
4. The TAD stays on, ready to answer calls, unless you turn it
off with the
7#
command.
5. When you finish, press
5#
to end remote access.
Note: If you enter an incorrect or invalid command, press
5#
to
stop and return to the remote main menu.
43-3801.fm Page 25 Friday, April 21, 2000 9:25 AM
