Need help? Call 1-800-763-9232
6
Notes:
• After you install batteries, the remote
performs a test of the display for 10 sec-
onds or until you press a key.
• To extend battery life, the display turns
off after 10 seconds of keypad inactivity
and turns on again when you press any
key.
• Device codes you have programmed
into the 7-in-One remain stored in mem-
ory while you replace the batteries.
However, you must reset the clock.
SETTING THE CLOCK
Follow these steps to set the clock on the 7-
in-One’s display.
1. Hold down
P
until
TIMED
SEQ
appears.
2. Press
twice.
CONFIGURE
appears.
3. Press
SELECT
.
THEATR
SEL
appears.
4. Press
again.
TIME SETUP
appears.
5. Press
SELECT
.
TIME
appears and the
first digit in the time flashes. Enter the
time in 12-hour format.
AM/PM
flashes.
6. If necessary, press
to toggle between
AM and PM, then press
SELECT
. The
day of the week display appears.
7. Use
and
to toggle through the
days of the week until the current day
appears, then press
SELECT
. The cur-
rently selected device and the correct
time appear.
15-1995.fm Page 6 Thursday, March 2, 2000 7:40 AM
