Need help? Call 1-800-763-9232
18
6. Point the 7-in-One at your cable con-
verter and press
POWER
. Your cable
converter should turn off. If it does not,
enter the next code from the list and
press
SELECT
then
POWER
again.
When your cable converter turns off,
press
ESCAPE
to stop programming.
Note: If your original cable converter remote
does not have an ON key, press
CH+
on the
7-in-One to turn on your cable converter.
TO OPERATE YOUR
SATELLITE RECEIVER
Locate the codes for your satellite receiver in
“Satellite Receivers” on Page 51 and write
them down on the supplied label.
Note: Some manufacturers have several
codes listed. Try each until you find the right
one. The brands are listed in alphabetical or-
der, with the most popular codes listed first.
Then follow these steps to program the 7-in-
One to operate your satellite receiver.
1. Turn on your satellite receiver.
2. Press
SAT
then hold down
P
until
TIMED
SEQ
appears.
3. Press
.
CODE
SETUP
appears.
4. Repeatedly press
SELECT
until
SAT/
DSS
appears.
5. Enter the first four-digit code listed for
your satellite’s brand, then press
SELECT
.
15-1995.fm Page 18 Thursday, March 2, 2000 7:40 AM
