Need help? Call 1-800-763-9232
31
TO OPERATE YOUR AMPLIFIER
Locate the codes for your amplifiers in “Setup Codes for
Amplifiers” on Page 32 and write them in the space be-
low. The brands are listed in alphabetical order, with the
most popular codes listed first.
Codes: _____________________________________
Then follow these steps to program the 7-in-One to op-
erate your amplifier.
1. Turn on your amplifier.
2. Press
AMP
.
3. Hold down
SETUP
until
TIMED
SEQ
appears.
4. Press
MENU
.
CODE
SETUP
appears.
5. Repeatedly press
SELECT
until
AMP
appears.
6. Enter the first code listed for your amplifier’s brand
then press
SELECT
.
7. Point the 7-in-One at the amplifier and press
POWER
. Your amplifier should turn off. If it does
not, enter the next code in the code list and press
SELECT
then
POWER
again. When the amplifier
turns off, press
ESC
to stop programming.
15-1935.fm Page 31 Thursday, December 31, 1998 11:37 AM