Need help? Call 1-800-763-9232
21
TO OPERATE YOUR CABLE
CONVERTER
Locate the codes for your cable converter in “Setup
Codes for Cable Converters” on Page 22 and write
them in the space below. The brands are listed in alpha-
betical order, with the most popular codes listed first.
Codes: _____________________________________
Follow these steps to program the 7-in-One to operate
your cable converter.
1. Turn on your cable converter.
2. Press
CBL
.
3. Hold down
SETUP
until
TIMED
SEQ
appears.
4. Press
MENU
.
CODE
SETUP
appears.
5. Repeatedly press
SELECT
until
CABLE
appears.
6. Enter the first three-digit code listed for your con-
verter’s brand, then press
SELECT
.
7. Point the 7-in-One at the cable converter and press
POWER
. Your cable converter should turn off. If it
does not, enter the next code in the code list and
press
SELECT
then
POWER
again. When your
cable converter turns off, press
ESC
to stop pro-
gramming.
Note: If your original cable converter remote does not
have an ON key, press
CH+
on the 7-in-One to turn on
your cable converter.
15-1935.fm Page 21 Thursday, December 31, 1998 11:37 AM
