4
Charge the Drone
1
. Set the drone's
ON/OFF
switch to
OFF
.
2.
Connect the included USB charging cable to the drone's
CHG
jack and a USB power source. The USB connector LED lights red
during charging, and turns off when charging is complete.
A full charge takes about 50 minutes, and gives you up to 5
minutes flight time.
3
. After charging, unplug the charging cable.
CAUTION
• Use only the included USB charging cable to charge the drone's
battery. Other cables may damage the drone.
• Always let the drone battery cool before recharging.
Lithium Battery Notes
Your drone uses a built-in lithium polymer battery for power. Follow
the instructions for charging.
•
Do not charge longer than recommended. Unplug the charging cable
when the drone is charged.
• Do not puncture or crush. Do not disassemble.
• Do not dispose of lithium batteries in the trash.
• If the electrolyte in the cells should get on your skin, thoroughly wash
with soap and water. If in the eyes, rinse thoroughly with cool water.
Immediately seek medical attention.
• Do not attempt to charge or operate damaged toys.
ON/OFF
CHG
LED
6001381_PM_En.indd 4
8/13/2015 5:00:36 PM
