11
Troubleshooting
Drone does not respond
• Make sure the drone and remote control are switched on and
paired.
• Avoid pairing both drones at the same time within 10 feet as this
causes interference. Pair each drone with its matching remote
control individually.
• Drone battery maybe low. Fully charge the battery. See
“Charge
the Drone.“
• Remote control batteries maybe low. Replace the batteries.
• Make sure the drone is within the control range (65 ft) and in line
of sight.
• In battle mode, make sure you fly within IR range (16 ft), and level
with your opponent to shoot. Stage your battles indoors to avoid
strong sunlight which affects IR reception.
Drone difficult to control
• The throttle control is very sensitive. Use small, fine movements
to control.
• Propellers maybe bent. Adjust propellers by hand. If you cannot
adjust them, replace with the spare propellers.
• Practice in low speed mode. See
“Fly Your Drone."
• The gyroscope inside your drone may need calibrating:
Calibrate Your Drone
1.
With your drone and remote control switched on and paired,
place the drone on level ground.
2.
Move the throttle all the way down.
3.
Move the steering forward and hold this position for a few
seconds until the drone LEDs start to blink.
4.
Release the steering. The drone LEDs light steadily, indicating
successful calibration. You are now ready for takeoff.
•
See
“Trim Your Drone"
to fine tune hovering and movement to
further improve control of your drone after calibration.
6001381_PM_En.indd 11
8/13/2015 5:00:39 PM
