18
To adjust the speakerphone’s volume,
repeatedly press
VOLUME
s or t on the
base. The volume setting from
1
(low-
est) to
10
(highest) appears in the mes-
sage counter window.
To end a speakerphone call, press
SPEAKER
again.
SWITCHING BETWEEN
THE HANDSET AND
SPEAKERPHONE
To switch to the speakerphone while
you are using the handset, press
SPEAKER
on the base. When you hear
the conversation or dial tone on the
speakerphone, press
TALK
on the hand-
set.
To switch to the handset while you are
using the speakerphone, simply lift the
handset off the base. If the handset is
away from the base, press
TALK
, then
press
SPEAKER
.
USING BOTH THE
HANDSET AND
SPEAKERPHONE
If someone else is using the speaker-
phone, press
TALK
on the handset to
join the conversation. If someone else is
using the handset, press
SPEAKER
on
the base to join the conversation.
During the call, one person can hang up
and let the call continue at the other key-
pad. Or, both people can hang up to end
the call.
Note: If you hear a high-pitched noise
from the base’s speaker, the handset
and the base are too close together.
USING FLASH
FLASH
performs the electronic equiva-
lent of a switchhook operation for spe-
cial services, such as Call Waiting.
For example, if you have Call Waiting,
press
FLASH
to answer an incoming call
without disconnecting the current call.
Press
FLASH
again to return to the first
call.
Note: If you do not have any special
phone services, pressing
FLASH
might
disconnect the current call.
43-797.fm Page 18 Monday, August 16, 1999 9:20 AM
