21
The Basics
Installing the Charging Cradle
You can power the cordless handset using the
supplied 9V, 210 mA AC adapter.
Insert the
supplied AC
adapter’s barrel
plug into the DC
IN 9V jack on
the back of the
charger.
Route the cord
through the strain relief slot and plug the adapter
into a standard AC outlet.
On a Wall Plate or Wall
To mount the phone directly on a wall, you need
two screws (not supplied) with heads that fi t into the
keyhole slots on the base.
Drill two holes 3
15/16
inches apart. Thread a screw
into each hole, letting the heads extend about
1/8
inch.
Insert the two tabs at the
bottom of the narrow end
of the supplied bracket
into the base’s lower tab
slots, then press down on
the bracket’s latches and
insert them into the upper
slots.
1.
2.
1.
DC IN 9V
TEL LINE
DC IN 9V
TEL LINE
Summary of Contents for 43-5829
Page 106: ...Beyond the Basics 106 Index...
Page 107: ...Beyond the Basics 107...
