T
he I
n
tegrat
ed
A
n
swering Device
65
R
EMOTE
O
PERATION
You can check, play, or delete messages,
even record a new greeting message from a
remote location (when you are away from
home, or from another room using a
handset). Additionally, you can turn On or
Off your answering system remotely.
Ô
Remote access away from home
You can operate your answering system
from a remote location using any touch-tone
telephone.
1. Call your telephone number and wait
for the system to answer. If the
answering system is off, it will answer
after about ten rings and sounds a
series of beeps.
2. During the greeting message (or a
series of beeps when the answering
system is off), press 0 and enter your
PIN code within two seconds (see
“Setting a PIN Code” on page 24).
3. The answering system announces the
current time and the number of
messages stored in memory. You hear
“To play incoming messages, press
zero-two. For help, press one-zero.”
You will hear a beep.
Ô
NOTES
Ô
•
Time stamp will not be
heard until you have set
the time.
•
The system will only play
back messages for four
minutes and then it
returns to the command
waiting mode. To
continue playing your
messages, press 0 then
2 again within 15
seconds.
•
If you enter an incorrect
PIN code three times,
you will hear a beep and
the system will return to
standby.
•
During the remote
operation,
“Line Remote”
appears on the handset
and the base.
•
If the answering system
is recording an incoming
message, the recording
operation is canceled
when you start remote
operation.
All manuals and user guides at all-guides.com
