In
s
ta
lla
ti
o
n
10
On a Wall Plate or Wall
To mount the phone directly on a wall, you
need two screws (not supplied) with heads
that fit into the keyhole slots on the base.
Drill two holes 3
15
/
16
inches apart. Thread a
screw into each hole, letting the heads
extend about
1
/
8
inch.
1. Route the AC adapter and the short
telephone line cord through the hole on
the bracket.
2. Slide the bracket into the notches on
the base.
3. Plug the adapter into a standard AC
outlet. Hook the cord on the notch of
the bracket.
4. Plug the telephone line cord into the
telephone outlet.
5. For a wall plate,
align the base’s
keyhole slots with
the wall plate
studs and slide
the base
downward to secure it.
For direct wall
mounting, align
the base’s
keyhole slots with
the mounting
screws and slide
the base downward to secure it.
C
ONNECTING
/C
HARGING THE
B
ATTERY
P
ACK
The phone comes with a rechargeable
nickel-metal hydride (Ni-MH) battery pack in
the handset, but not connected. Before
using your phone, you must connect the
battery pack. Then charge it for about 15–
20 hours.
To remove, push up
a tab on the wall
mount adapter as
shown.
All manuals and user guides at all-guides.com
