background image

©

 2004 RadioShack Corporation.

All Rights Reserved.

RadioShack and RadioShack.com are trademarks 

used by RadioShack Corporation.

E

NERGY

S

TAR

 and the E

NERGY

S

TAR

 certification mark 

are registered US marks.

DirectLink is a registered trademark of Uniden Corporation.

OWNER’S MANUAL 

 

Please read before using this equipment.

5.8 GHz Multi-Handset Expandable 
Cordless Telephone with Digital 
Answering System

43-3880

!

 IMPORTANT 

!

If an icon appears at the end of a paragraph, go to the box on that page with the 
corresponding icon for pertinent information.

o

— Warning

!

 — Important 

 — Caution

Ô

 — Note

Memo Recording — 

lets you leave messages for 

yourself or others in your home or office, or record your 
phone conversations. (See “Voice memo” on page 63.)

Phone Pick-Up Detection — 

stops recording when 

you pick up any phone on the same line as the 
answering system, and resets to answer the next call.

Call Screening — 

lets you listen as a caller leaves a 

message. (See “Screening a call” on page 59.)

Speakerphone — 

lets you conduct a hands-free 

conversation using the handset and base speaker. (See 
“Making and Receiving Calls” on page 27)

Handset Remote Operation — 

lets you listen to your 

incoming messages from the handset. (See “Remote 
Operation” on page 64.)

Message Alert — 

beeps when you have new incoming 

message. (See “Setting the message alert” on page 57.)

Convenient Extension Placement — 

lets you place 

accessory handsets (up to ten total) anywhere you have 
an AC outlet, regardless of phone jack location.

Call Waiting/Caller ID — 

lets you answer a call even 

when you’re on the phone and see who’s calling before 
you answer.

Summary of Contents for 43-3880









































































Reviews: